Steel

Architects' Journal|

Stainless steel. AJ 04.05.2006|

Metal Works: Dutch buildings. AJ 25.3.04

British Board of Agrément|

Certificate 05/4204 Teraspeikko Oy Deltatek. Deltabeam
Replaces certificate 03/3989

British Constructional Steelwork Association|

Publication 40/05 Galvanizing structural steelwork: An approach to the management of liquid metal assisted cracking
Produced by a Working group from BCSA and the Galvanizers Association

BRE|

Digest 305 Zinc-coated steel

Digest 349 Stainless steel as a building material
Replaces - BRE Digest 121

Digest 487 Part 2 Structural fire engineering design: materials behaviour - steel

Digest 491 Corrosion of steel in concrete: a review of the effect of humidity

British Standards Institution|

BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections
Supersedes BS 4-1:1993

BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification
Supersedes BS 1449:Part 1:1983

BS 1449-2:1983 Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip (AMD 4807) (AMD 6646) (AMD 8828) (AMD 9648) (No longer current but cited in Building Regulations)
Superseded by BS EN 10095:1999 and BS EN 10029:1991 and BS EN 10048:1997 and BS EN 10051:1992 and BS EN 10258:1997 and BS EN 10259:1997. This standard is no longer current but cited in building regulations

BS 5950-3.1:1990 Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and continuous composite beams

BS 5950-5:1998 Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections (AMD 16502)
Supersedes BS 5950-5:1987. Amendment 16502 dated September 2006

BS 5950-6:1995 Structural use of steelwork in building. Code of practice for design of light gauge profiled steel sheeting (AMD 10239) (AMD 10475)

BS EN 10020:2000 Definition and classification of grades of steel
Supersedes BS EN 10020:1991. Confirmed August 2005

BS EN 10025-1:2004 Hot rolled products of structural steels. General technical delivery conditions
Supersedes BS EN 10025:1993

BS EN 10025-2:2004 Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels
Supersedes BS EN 10025:1993

BS EN 10025-3:2004 Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Supersedes BS EN 10113-1:1993 and BS EN 10113-2:1993

BS EN 10025-4:2004 Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Supersedes BS EN 10113-1:1993 and BS EN 10113-3:1993

BS EN 10025-5:2004 Hot rolled products of structural steels. Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Supersedes BS EN 10155:1993

BS EN 10025-6:2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Supersedes BS EN 10137-1:1996 and BS EN 10137-2:1996

BS EN 10027-1:2005 Designation systems for steel. Steel names
Supersedes BS EN 10027-1:1992 and PD 6622:1998

BS EN 10027-2:1992 Designation systems for steels. Steel numbers

BS EN 10028-1:2000 Flat products made of steels for pressure purposes. General requirements (AMD 14284)
Supersedes BS EN 10028-1:1993

BS EN 10028-2:2003 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
Supersedes BS EN 10028-2:1993

BS EN 10028-3:2003 Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized

BS EN 10028-4:2003 Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
Supersedes BS EN 10028-4:1995

BS EN 10028-5:2003 Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
Supersedes BS EN 10028-5:1997

BS EN 10028-6:2003 Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
Supersedes BS EN 10028-6:1997

BS EN 10028-7:2000 Flat products made of steels for pressure purposes. Stainless steels (AMD Corrigendum 15330)
Supersedes BS 1501-3:1990. Amendment 15330 is Corrigendum No.1

BS EN 10029:1991 Tolerances on dimensions, shape and mass for hot rolled steel plates 3mm thick or above
Supersedes BS 1449-2:1983, BS 1501-1:1980, BS 1501-2:1988, BS 1501-3:1990 and BS 4360:1990.

BS EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions

BS EN 10051:1992 Specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - tolerances on dimensions and shape (AMD 9872)
Supersedes BS 1449-1.6:1991, BS 1449-2:1983 and BS 1501-3:1990.

BS EN 10056-1:1999 Structural steel equal and unequal leg angles. Dimensions
Supersedes BS 4848-4:1972

BS EN 10056-2:1993 Specification for structural steel equal and unequal leg angles. Tolerances on shape and dimensions

BS EN 10067:1997 Hot rolled bulb flats - dimensions and tolerances on shape, dimensions and mass
Supersedes BS 4848-5:1980

BS EN 10079:1993 Definition of steel products
Supersedes BS 6562-2:1986

BS EN 10088-1:1995 Stainless steels. List of stainless steels (No longer current but cited in Building Regulations)
This document is no longer current but is cited in Building Regulations. Superseded by BS EN 10088-1:2005.

BS EN 10088-1:2005 Stainless steels. List of stainless steels
Supersedes BS EN 10088-1:1995.

BS EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Supersedes BS EN 10088-2:1995

BS EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Supersedes BS 1554:1990 and BS EN 10088-3:1995

BS EN 10143:2006 Continuously hot-dip metal coated steel sheet and strip - tolerances on dimensions and shape
Supersedes BS EN 10143:1993.

BS EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Supersedes BS 5996:1993

BS EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats
Supersedes BS EN 10163-2:1991.

BS EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections
Supersedes BS EN 10163-3:1991.

BS EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - technical delivery conditions
Supersedes BS EN 10164:1993.

BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery conditions
Supersedes BS EN 10210-1:1994.

BS EN 10210-2:2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
Supersedes BS EN 10210-2:1997.

BS EN 10250-4:2000 Open die steel forgings for general engineering purposes. Stainless steels
Supersedes table 11 in BS 970-1:1996. Confirmed October 2005

BS EN 10277-1:1999 Bright steel products - technical delivery conditions. General
Together with BS EN 10278 and BS EN 10277 parts 2 to 5 supersedes BS 970-3:1991. Confirmed October 2005

BS EN 10293:2005 Steel castings for general engineering uses
Supersedes BS 3100:1991. Confirmed October 2005

BS EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
Supersedes BS EN 10147:1992. Together with BS EN 10327:2004 supersedes BS EN 10154:2002, BS EN 10214:1995 and BS EN 10215:1995

BS EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
Supersedes BS EN 10142:2000. Together with BS EN 10326:2004 supersedes BS EN 10154:2002, BS EN 10214:1995 and BS EN 10215:1995

BS EN 13438:2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes
Supersedes BS 6497:1997 which is declared obsolescent but remains current

BS EN ISO 9013:2002 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (AMD Corrigendum 14615) (AMD 14956)
Supersedes BS EN ISO 9013:1995. Amendment 14615 is Corrigendum No.1

British Steel Sections, Plates and Commercial Steels|

Structural sections in accordance with ASTM specifications|

Structural sections to BS 4: Part 1 and BS 4848: Part 4|

Design in Steel 4 Castellated and cellular beams

British Steel Tubes and Pipes|

SHS welding|

Design of welded joints - BS 5950 and ENV 1993-1-1-annex K|

SHS design to BS 5950: Part 1|

Design of lattice roof structures in structural hollow sections|

SHS jointing|

Design Manual for Concrete Filled Columns Part 1 Structural design

Chartered Institute of Building|

Technical Information Sheet 51 Steelwork today

CIRIA|

Guide G 3 Structural action in steel box girders

Special Publication SP 51 Design for openings in the webs of composite beams
This is a jointly published document also by the Steel Construction Institute

Technical Note TN 102 Web buckling of rolled steel beams

Concrete Society|

Concrete Advice 19 Historic reinforcing bars and steel fabric

European Convention for Construction Steelwork|

Publication 65 Essentials of Eurocode 3 design manual for steel structures in building

Publication 71 Examples to Eurocode 3

Publication 72 Composite beams and columns to Eurocode 4

Publication 73 Good construction practice for composite slabs

Publication 75 Fire safety in open car parks: Modern fire engineering

Publication 81 Bridges in steel - the use of weathering steel in bridges

Publication 82 Fire design information sheets

Publication 84 Multi storey buildings in steel - car parks

Publication 85 Design handbook for braced or non sway steel buildings according to Eurocode 3

Publication 89 Fire resistance of steel structures (on the basis of ENV 1993-1.2:1995)

Publication 96 Design handbook for braced composite steel-concrete buildings according to Eurocode 4

Publication 105 Good design practice: a guideline for fatigue design

Publication 115 European recommendations for sandwich panels. Part 1: Design

Galvanizers' Association|

Engineers and architects' guide to hot dip galvanizing

National Federation of Roofing Contractors|

Technical Bulletin 11 Flat metal composite wall panels

Steel Construction Institute|

Design manual for structural stainless steel. 3rd edition
Supersedes 2nd edition.

Publication 055 Design of composite slabs and beams with steel decking

Publication 057 Design of members subject to combined bending and torsion
Reprinted - 1997

Publication 059 Design of fabricated composite beams in buildings

Publication 060 Design of haunched composite beams in buildings

Publication 078 Commentary on BS 5950: Part 3: Section 3.1 'Composite beams'

Publication 083 Design of composite trusses

Publication 093 Lateral stability of steel beams and columns - common cases of restraint

Publication 100 Design of composite and non-composite cellular beams

Publication 102 Connections between steel and other materials - interfaces

Publication 118 Design of stub girders

Publication 121 Composite beam design to Eurocode 4

Publication 123 Concise guide to the structural design of stainless steel (2nd ed)

Publication 125 Building design using cold formed steel sections: worked examples to BS 5950: Part 5: 1987

Publication 128 Building design using cold formed steel sections: acoustic insulation

Publication 150 Design for manufacture guidelines

Publication 152 Section property and member capacity tables for cold-formed stainless steel

Publication 158 Section properties and member resistances to Eurocode 3 (UB, UC and hollow sections)

Publication 164 Design of steel portal frames for Europe

Publication 165 Building design using cold formed steel sections: Construction detailing and practice

Publication 166 Design of steel framed buildings for service integration: interfaces

Publication 174 Role of steel in environmentally responsible buildings

Publication 179 Architects' guide to stainless steel

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part 0 - Contents (1 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part A - Explanatory notes: white pages (2 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part B1 - Tables of dimensions and gross section properties: yellow pages (3 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part B2 - Tables of effective section properties: blue pages (4 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part C (S275) - Member capacity tables: pink pages (5 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 202 Steelwork design guide to BS 5950-1:2000. Volume 1 section properties, member capacities. 6th edition (incorporating amendment 1) | Part D (S355) - Member capacity tables: green pages (6 of 6)
Produced in conjunction with the British Constructional Steelwork Association (BCSA). This document is part of a larger document, Steelwork design guide to BS 5950-1:2000. Volume 1, which has been split into parts for ease of use.

Publication 207 Joints in steel construction: moment connections | Part 1 - Moment connections. (1 of 2)
Published in association with the British Constructional Steel Association (BCSA). This 3rd reprint published - 1997 (with amendments). First published - 1995. This document is part of a larger document, Joints in steel construction: moment connections, which has been split into parts for ease of use.

Publication 207 Joints in steel construction: moment connections | Part 2 - Capacity tables and dimensions for detailing. (2 of 2)
Published in association with the British Constructional Steel Association (BCSA). This 3rd reprint published - 1997 (with amendments). First published - 1995.This document is part of a larger document, Joints in steel construction: moment connections, which has been split into parts for ease of use

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 24 - Appendix H Capacity tables, dimensions for detailing and general data - Dimensions for detailing (25 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 25 - Appendix H Capacity tables, dimensions for detailing and general data - Section dimensions and properties (26 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 0 - Title page, foreword, acknowledgements, pictorial index and contents pages (1 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 1 - Introduction (2 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 2 - Standardised connections (3 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 3 - Beam-to-beam and beam-to-column connections (4 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 4 - Double angle web cleats (5 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 5 - Flexible end plates (6 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 6 - Fin plates (7 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 7 - Column splices (8 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 8 - Column bases (9 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 9 - Bracing connections (10 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 10 - Special connections (11 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 11 - References (12 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 12 - Bibliography (13 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 13 - Appendices A-G (14 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 14 - Appendix H Capacity tables, dimensions for detailing and general data - Contents (15 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 15 - Appendix H Capacity tables, dimensions for detailing and general data - Standard fittings (16 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 16 - Appendix H Capacity tables, dimensions for detailing and general data - Double angle web cleats (17 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 17 - Appendix H Capacity tables, dimensions for detailing and general data - Flexible end plates (18 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 18 - Appendix H Capacity tables, dimensions for detailing and general data - Fin plates (19 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 19 - Appendix H Capacity tables, dimensions for detailing and general data - Universal column - bearing type splices (20 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 20 - Appendix H Capacity tables, dimensions for detailing and general data - Hollow section tension splices (21 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 21 - Appendix H Capacity tables, dimensions for detailing and general data - Column bases (22 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 22 - Appendix H Capacity tables, dimensions for detailing and general data - Material strengths (23 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 212 Joints in steel construction: Simple connections (includes corrigendum 1 October 2002) | Part 23 - Appendix H Capacity tables, dimensions for detailing and general data - Fastener capacities (24 of 26)
Design guidance for a range of simple connections was originally published in two separate volumes entitled Joints in simple construction: Volume 1: Design Methods (P205) and Volume 2: Practical Applications (P206/92). This document supersedes P205 and P206. Includes Corrigendum No1. dated October 2002. Jointly published with the BCSA. This document is part of a larger document, Joints in steel construction: Simple connections and includes corrigendum 1 October 2002, which has been split into parts for ease of use.

Publication 213 Joints in steel construction: composite connections
Produced in conjunction with the British Constructional Steelwork Association (BCSA).

Publication 252 Design of single-span steel portal frames to BS 5950-1:2000

Publication 287 Design of composite beams using precast concrete slabs
This project was part-funded by the DETR under the Partners in Innovation initiative (project contract number CI 38/10/77), and by The Corus Construction Centre and the Precast Flooring Federation.

Publication 291 Structural design of stainless steel
This document is part of a larger document, Structural design of stainless steel: stainless steel, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 0 - Title page, contents, foreword, summary (1 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 1 - In-plane stability checks in BS 5950-1:2000 (2 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 2 - Introduction to in-plane stability (3 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 3 - Sway-check method (4 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 4 - Amplified moments method (5 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 5 - Second-order analysis (6 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 6 - Member checks (7 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 7 - References (8 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 8 - Appendix A - Second-order analysis of common portals 'by hand' (9 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 9 - Appendix B - Second order analysis of tied portals 'by hand' (10 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 10 - Appendix C - Effective stiffness of members (11 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 11 - Appendix D - Deflections from horizontal loads for 'hand' second-order calculations (12 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 12 - Appendix E - Hinge deflections by interpolation (13 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 13 - Worked Example 1 - Single span roof portal frame (14 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 14 - Worked Example 2 - Tied portal frame (15 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 15 - Worked Example 3 - Two-span portal frame (16 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 292 In-plane stability of portal frames to BS 5950-1:2000 | Part 16 - Worked Example 4 - Two-span portal frame with hit/miss internal columns (17 of 17)
This document is part of a larger document, In-plane stability of portal frames to BS 5950-1:2000, which has been split into parts for ease of use.

Publication 300 Composite slabs and beams using steel decking: best practice for design and construction
Published in conjunction with the Metal Cladding and Roofing Manufacturers Association and also known as MCRMA Technical Paper 13. Updates the SCI Pub, Good practice in composite floor construction, 1990 and is based on SCI Pub, Design of composite slabs and beams with steel decking, 1989. Important notice: Site practice, particularly with regard to safety and the use of nets to prevent falls, has moved-on since this publication was written.

Publication 304 Guide to the major amendments in BS 5950-1:2000

Publication 334 Design of multi storey braced frames

Publication 335 H-pile design guide

Publication 336 Acoustic detailing for multi storey residential buildings

Publication 338 Quicon® - Design guide to BS 5950-1

Report 1085 Guidance on the use of intumescent coatings for the fire protection of beams with web openings. Version 2
Supersedes RT983.

BackToTop